500w staircase lights timer without neutral
Flush-mounted
Model: MTM500E
Item number: 5454051
On DIN rail
Model: MTM500M
Item number: 5454061
WHAT MAKES YOKIS UNIQUE
COMFORTABLE: Progressive switch-off notification when the timer is about to go off.
FUNCTIONAL: Timer from 2 seconds to 4 hours.
Coil with protection system in case pushbutton is pressed for a prolonged period of time.
CONVENIENT: Double timing keeps lights on for 1 hour.
THE ADVANTAGES OF THE 500W STAIRCASE LIGHTS TIMER WITHOUT NEUTRAL
Works with pushbuttons equipped with light indicator (max 20) by adding a single BV40 accessory (item no. 5454071).
Can be used with pushbutton common to neutral (3 wires) or to live (4 wires)
The flush-mounted module MTM500E is 100% waterproof for outdoor installation.
Digital coil with protection system in case pushbutton is pressed for a prolonged period of time.
Increases light bulb and pushbutton duration.
Compatible with existing systems, with pushbutton common to neutral or to live.
Download the EU declaration of conformity – item no. 5454051
Download the EU declaration of conformity – item no. 5454061
Technical features
Network voltage
230V ~ (+10% - 15%) - 50Hz
Power
min. 5VA max. 500VA (300VA in sealed boxes)
Maximum current
1.3A / 2.2A Sealed boxes: 1.3A / 300VA Other boxes: 2.2A / 500VA
Room temperature
-20°C + 40°C
Relative humidity
from 0 to 99%
Dimensions (mm)
see figure
- The flush-mounted module MTM500E is 100% waterproof for outdoor installation.
- Can be controlled by 12 or 48 VAC or DC with ADBT accessory.
- Inrush current limitation through filament pre-heating.
- Built-in electronic protection in case of short circuit on the load, with automatic reset after the fault is eliminated.
- Electronic overheating protection.
- Double overload protection with power cut-off.
- Digital coil with protection system in case pushbutton is pressed for a prolonged period of time.
- Immune to mains disturbances up to 1.5 kV.
- Increases light bulb and pushbutton duration.
Click here to view allowed loadsCVI50 (item n. 5454805): Allows the centralisation of modules from the 500 range
BV40 (item n. 5454071): Electronic coil. Allows the use of modules from the 500 range with pushbuttons equipped with light indicator
D600V (item n. 5454072): Diode for module centralisation with driver wire
CHR3W (item n. 5454070): Resistive load for energy-saving light bulbs and LEDS
ADBT (item n. 5454076): 12-48V AC or DC low-voltage adapter
