500w electronic toggle relays with neutral
Flush-mounted
Model: MTR500E
Item number: 5454050
On DIN rail
Model: MTR500M
Item number: 5454060
WHAT MAKES YOKIS UNIQUE
SIMPLE: connection without neutral; flush-mounted model requires no connections back to the electric panel for pushbuttons or lamps.
COMFORTABLE: 100% quiet operation
COST-EFFECTIVE: Soft start/stop feature preserves the life of your light bulbs
CONVENIENT: The flush-mounted MTR500 model makes for simplified wiring and frees up space inside the electric panel.
THE ADVANTAGES OF 500W ELECTRONIC TOGGLE RELAYS WITH NEUTRAL
Also works with pushbuttons equipped with light indicator (max 20) by adding a single BV40 accessory (item no. 5454071)
Can be fitted to existing wiring – with switch, two-way switch or inverter
Digital coil with protection system in case pushbutton is operated for a prolonged period of time
Increases light bulb and pushbutton duration thanks to the Soft Start function
Compatible with existing wiring, even when pushbutton common wire is already connected to neutral or to live.
Download the EU declaration of conformity – item no. 5454050
Download the EU declaration of conformity – item no. 5454060
Technical features
Network voltage
230V ~ (+10% - 15%) - 50Hz
Power
min. 5VA max. 500VA (300VA in sealed boxes)
Maximum current
1.3A / 2.2A Sealed boxes: 1.3A / 300VA Other boxes: 2.2A / 500VA
Room temperature
-20°C + 40°C
Relative humidity
from 0 to 99%
Dimensions (mm)
see figure
- The flush-mounted module MTR500E is 100% waterproof for outdoor installation
- Inrush current limitation through filament pre-heating
- Built-in electronic protection in case of short circuit on the load, with automatic reset after the fault is eliminated
- Electronic overheating protection
- Can be controlled by 12 or 48 VAC or DC with ADBT accessory
- Immune to mains disturbances up to 1.5 kV
- Increases light bulb and pushbutton duration
Click here to view allowed loadsCVI50 (item n. 5454805): Allows the centralisation of modules from the 500 range
BV40 (item n. 5454071): Electronic coil. Allows the use of modules from the 500 range with pushbuttons equipped with light indicator
D600V (item n. 5454072): Diode for module centralisation with driver wire
CHR3W (item n. 5454070): Resistive load for energy-saving light bulbs and LEDS
ADBT (item n. 5454076): 12-48V AC or DC low-voltage adapter
