500w electronic toggle relays with neutral

Flush-mounted

Model: MTR500E

Item number: 5454050

On DIN rail

Model: MTR500M

Item number: 5454060

WHAT MAKES YOKIS UNIQUE

SIMPLE: connection without neutral; flush-mounted model requires no connections back to the electric panel for pushbuttons or lamps.

COMFORTABLE: 100% quiet operation

COST-EFFECTIVE: Soft start/stop feature preserves the life of your light bulbs

CONVENIENT: The flush-mounted MTR500 model makes for simplified wiring and frees up space inside the electric panel.

 

THE ADVANTAGES OF 500W ELECTRONIC TOGGLE RELAYS WITH NEUTRAL

Also works with pushbuttons equipped with light indicator (max 20) by adding a single BV40 accessory (item no. 5454071)

Can be fitted to existing wiring – with switch, two-way switch or inverter

Digital coil with protection system in case pushbutton is operated for a prolonged period of time

Increases light bulb and pushbutton duration thanks to the Soft Start function

Compatible with existing wiring, even when pushbutton common wire is already connected to neutral or to live.

Download the EU declaration of conformity – item no. 5454050
Download the EU declaration of conformity – item no. 5454060

Technical features

Network voltage

230V ~ (+10% - 15%) - 50Hz

Power

min. 5VA max. 500VA (300VA in sealed boxes)

Maximum current

1.3A / 2.2A Sealed boxes: 1.3A / 300VA Other boxes: 2.2A / 500VA

Room temperature

-20°C + 40°C

Relative humidity

from 0 to 99%

Dimensions (mm)

see figure

  • The flush-mounted module MTR500E is 100% waterproof for outdoor installation
  • Inrush current limitation through filament pre-heating
  • Built-in electronic protection in case of short circuit on the load, with automatic reset after the fault is eliminated
  • Electronic overheating protection
  • Can be controlled by 12 or 48 VAC or DC with ADBT accessory
  • Immune to mains disturbances up to 1.5 kV
  • Increases light bulb and pushbutton duration

CVI50 (item n. 5454805): Allows the centralisation of modules from the 500 range

BV40 (item n. 5454071): Electronic coil. Allows the use of modules from the 500 range with pushbuttons equipped with light indicator

D600V (item n. 5454072): Diode for module centralisation with driver wire

CHR3W (item n. 5454070): Resistive load for energy-saving light bulbs and LEDS

ADBT (item n. 5454076): 12-48V AC or DC low-voltage adapter

Wiring with pushbutton common to live

Download datasheet

500 range module centralisation

Download datasheet

Wiring with pushbutton common to neutral

Download datasheet

Wiring in electric panel with pushbutton common to live

Download datasheet

Switched power increase – 500 range

Download datasheet

Low-voltage pushbuttons with the 500 range

Download datasheet

Wiring in electric panel with pushbutton common to neutral

Download datasheet