2000w toggle relay with neutral and optional timed operation

Flush-mounted

Model: MTR2000E

Item number: 5454350

On DIN rail

Model: MTR2000M

Item number: 5454360

WHAT MAKES YOKIS UNIQUE

COST-EFFECTIVE: MTR2000 units can be centralised using a simple driver wire and some diodes: no additional accessories are needed. Built-in timer function (unlimited or adjustable from 2 seconds up to 4 ours)

COMFORTABLE: Silent, as if it was not there, even when installed behind the pushbuttons.

UNIVERSAL: Compatible with the controls of all wiring systems.
Compatible with all load types.

 

THE ADVANTAGES OF THE 200W TOGGLE RELAY WITH OPTIONAL TIMED OPERATION

Can be set to switch off automatically after an adjustable time ranging from 2 seconds to 4 hours

Optional switch-off notification can be configured by installer

Allows for switch-off before set time times out

Operates silently without bothering users

Easily centralised with driver wire on non-interlocked double pushbutton
Extremely compact size, will fit behind any pushbutton

Digital coil with protection system in case pushbutton is operated for a prolonged period of time

Compatible with existing wiring where pushbutton common wire is already connected to neutral or to live (3 or 4-wire mode)

Simplified wiring requires no connections back to the electric panel for pushbuttons or light bulbs

Does not work with pushbuttons equipped with light indicator. In this case, use MTM2000 configured as a relay

Download the EU declaration of conformity – item no. 5454350

Download the EU declaration of conformity – item no. 5454360

Technical features

Network voltage

230V ~ (+10% - 15%) - 50Hz

Power

min. 5VA max. 500VA (300VA in sealed boxes)

Maximum current

1.3A / 2.2A Sealed boxes: 1.3A / 300VA Other boxes: 2.2A / 500VA

Room temperature

-20°C + 40°C

Relative humidity

from 0 to 99%

  • The flush-mounted module MTT500E is 100% waterproof for outdoor installation.
  • Inrush current limitation through filament pre-heating
  • Built-in electronic protection in case of short circuit on the load, with automatic reset after the fault is eliminated
  • Electronic overheating protection
  • Can be controlled by 12 or 48 VAC or DC with ADBT accessory
  • Immune to mains disturbances up to 1.5 kV
  • Increases light bulb and pushbutton duration

R12M (item n. 5454073): Double pushbutton interface, allows for switch-on/off control in centralised systems

D600V (item n. 5454072): Diode for module centralisation with driver wire

ADBT (item n. 5454076): 12-48V AC or DC low-voltage adapter

Wiring with pushbutton common to neutral (3 wires)

Download datasheet

Wiring with pushbutton common to live (4 wires)

Download datasheet

Wiring in electric panel with pushbutton common to neutral (3 wires)

Download datasheet

Wiring in electric panel with pushbutton common to live (4 wires)

Download datasheet

Exhaust fan timing

Download datasheet

Control by (12-48V AC or DC) low-voltage pushbutton

Download datasheet

Control of a timed relay by a presence detector or other type of automated method

Download datasheet

Centralised lights control with the 2000 range

Download datasheet