2000w toggle relay with neutral and optional timed operation
Flush-mounted
Model: MTR2000E
Item number: 5454350
On DIN rail
Model: MTR2000M
Item number: 5454360
WHAT MAKES YOKIS UNIQUE
COST-EFFECTIVE: MTR2000 units can be centralised using a simple driver wire and some diodes: no additional accessories are needed. Built-in timer function (unlimited or adjustable from 2 seconds up to 4 ours)
COMFORTABLE: Silent, as if it was not there, even when installed behind the pushbuttons.
UNIVERSAL: Compatible with the controls of all wiring systems.
Compatible with all load types.
THE ADVANTAGES OF THE 200W TOGGLE RELAY WITH OPTIONAL TIMED OPERATION
Can be set to switch off automatically after an adjustable time ranging from 2 seconds to 4 hours
Optional switch-off notification can be configured by installer
Allows for switch-off before set time times out
Operates silently without bothering users
Easily centralised with driver wire on non-interlocked double pushbutton
Extremely compact size, will fit behind any pushbutton
Digital coil with protection system in case pushbutton is operated for a prolonged period of time
Compatible with existing wiring where pushbutton common wire is already connected to neutral or to live (3 or 4-wire mode)
Simplified wiring requires no connections back to the electric panel for pushbuttons or light bulbs
Does not work with pushbuttons equipped with light indicator. In this case, use MTM2000 configured as a relay
Download the EU declaration of conformity – item no. 5454350
Download the EU declaration of conformity – item no. 5454360
Technical features
Network voltage
230V ~ (+10% - 15%) - 50Hz
Power
min. 5VA max. 500VA (300VA in sealed boxes)
Maximum current
1.3A / 2.2A Sealed boxes: 1.3A / 300VA Other boxes: 2.2A / 500VA
Room temperature
-20°C + 40°C
Relative humidity
from 0 to 99%
- The flush-mounted module MTT500E is 100% waterproof for outdoor installation.
- Inrush current limitation through filament pre-heating
- Built-in electronic protection in case of short circuit on the load, with automatic reset after the fault is eliminated
- Electronic overheating protection
- Can be controlled by 12 or 48 VAC or DC with ADBT accessory
- Immune to mains disturbances up to 1.5 kV
- Increases light bulb and pushbutton duration
Click here to view allowed loadsR12M (item n. 5454073): Double pushbutton interface, allows for switch-on/off control in centralised systems
D600V (item n. 5454072): Diode for module centralisation with driver wire
ADBT (item n. 5454076): 12-48V AC or DC low-voltage adapter
Control of a timed relay by a presence detector or other type of automated method
