luci-scale-testata

Switch-on, switch-off and timed light control using Yokis digital modules

500w staircase lights timer without neutral

timer-luci-scale-500w-senza-neutro

Flush-mounted

Model: MTM500E

Item number: 5454051

On DIN rail

Model: MTM500M

Item number: 5454061

WHAT MAKES YOKIS UNIQUE

COMFORTABLE: Progressive switch-off notification when the timer is about to go off.

FUNCTIONAL: Timer from 2 seconds to 4 hours.

Coil with protection system in case pushbutton is pressed for a prolonged period of time.

CONVENIENT: Double timing keeps lights on for 1 hour.

THE ADVANTAGES OF THE 500W STAIRCASE LIGHTS TIMER WITHOUT NEUTRAL

Works with pushbuttons equipped with light indicator (max 20) by adding a single BV40 accessory (item no. 5454071).

Can be used with pushbutton common to neutral (3 wires) or to live (4 wires)

The flush-mounted module MTM500E is 100% waterproof for outdoor installation.

Digital coil with protection system in case pushbutton is pressed for a prolonged period of time.

Increases light bulb and pushbutton duration.

Compatible with existing systems, with pushbutton common to neutral or to live.

Download the EU declaration of conformity – item no. 5454051

Download the EU declaration of conformity – item no. 5454061

Technical features

Network voltage

230V ~ (+10% - 15%) - 50Hz

Power

min. 5VA max. 500VA (300VA in sealed boxes)

Maximum current

1.3A / 2.2A Sealed boxes: 1.3A / 300VA Other boxes: 2.2A / 500VA

Room temperature

-20°C + 40°C

Relative humidity

from 0 to 99%

Dimensions (mm)

see figure

dimension-mtr500
  • The flush-mounted module MTM500E is 100% waterproof for outdoor installation.
  • Can be controlled by 12 or 48 VAC or DC with ADBT accessory.
  • Inrush current limitation through filament pre-heating.
  • Built-in electronic protection in case of short circuit on the load, with automatic reset after the fault is eliminated.
  • Electronic overheating protection.
  • Double overload protection with power cut-off.
  • Digital coil with protection system in case pushbutton is pressed for a prolonged period of time.
  • Immune to mains disturbances up to 1.5 kV.
  • Increases light bulb and pushbutton duration.

CVI50 (item n. 5454805): Allows the centralisation of modules from the 500 range

BV40 (item n. 5454071): Electronic coil. Allows the use of modules from the 500 range with pushbuttons equipped with light indicator

D600V (item n. 5454072): Diode for module centralisation with driver wire

CHR3W (item n. 5454070): Resistive load for energy-saving light bulbs and LEDS

ADBT (item n. 5454076): 12-48V AC or DC low-voltage adapter

SD541-0509

Wiring in electric panel with illuminated pushbuttons to neutral, with BV40

Download datasheet

SD541-0508

Wiring in electric panel with illuminated pushbuttons to live, with BV40

Download datasheet

SD541-0507_LR

Wiring with illuminated pushbuttons to live, with BV40

Download datasheet

sd541-0008

500 range module centralisation

Download datasheet

sd541-0513 (1)

Switched power increase – 500 range

Download datasheet

sd541-0005 (1)

Low-voltage pushbuttons with the 500 range

Download datasheet