A radio installation with Yokis transmitters and receivers is simple, scalable and programmable
2000w 10A radio toggle relay with neutral
Item number: 5454462
Item number: 5454463
WHAT MAKES YOKIS UNIQUE
Uses a potential free contact to control any type of light up to 2000W and any type of actuator, such as electric gates and automated garage doors. Can be connected to other Yokis radio receiver models to design centralised and group controls.
EASY: Double timing allows for durations as long as 12 hours
THE ADVANTAGES OF THE 200W 10A RADIO TOGGLE RELAY
Relay with optional timed operation from 2 seconds up to 4 hours
Controlled by a radio transmitter as well as by a wired pushbutton or switch
Can be converted into a battery-less transmitter operating on 230V.
Thanks to its potential free contact, it can be used in any type of application that requires a dry contact.
It can be controlled by an unlimited number of transmitters
Full information on transmitter and receiver configuration and configuration guides for Radio Bus in the Radio Quick Installation Guide.
230V ~ (+10% - 15%) - 50Hz
on resistive load: 10A – 250VAC, max. 2500VA 10A – 30VDC max. 300VA Other loads: Max. 500VA
< 1VA - < 0.3W
-20°C + 50°C
< 60 dB at 20cm
from 0 to 99%
see figure Antenna dimensions: 80mm height, cable length: 25cm
250m in free field without obstacles.
Range is reduced by metal items, walls or partitions
Two-way with notification LED on transmitter
RAL60 (item n. 5454083): 60 cm extension for external antenna
RAL200 (item n. 5454084): 2m extension for external antenna
Transmitters: Compatible with all Yokis transmitters
Combined radio wired wiring
Adding a pushbutton to a two-way switch circuit with E2BP
Controlling a combined wired and radio dimmer via radio
Controlling a dual-speed exhaust fan via radio
Lights control via radio with programming clock, dusk sensor…
Controlling a wired centralisation of window shutters with MTR2000ER units
Combined wired and radio wiring with presence detector